Quest Flying Model Rocket Kit Striker AGM QST 2020
Impressive scale-like missile stands over 27 inches tall. Kit features a unique molded boat-tail and 10 degree plastic nose cone. The laser-cut balsa fins make assembly easy and there's a big water-slide decal sheet with lots of visual details.
Skill Level: 2
Recovery: Parachute
Fin Type: Balsa
Length: 27.75in / 70.5cm
Diameter: 1.378in / 35mm (T35)
Engines (Motors): B6-4 (first flight), C6-3, C6-5
Altitude (Estimated Max): 900ft / 274m
Rockets are rated by skill level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
-
Quest Striker AGM
One of Quests cooler kits. Love the missile design and flies very well on a broad selection of motors.
