BSI 105 Plastic Model Glue 0.5oz
Odorless Brush on glue for Plastic Models
0.5 ounces
Bonds all plastics, wood and foam
Directions: Brush on Plastic Cure to one surface of the parts being joined, then hold parts tight together for 10-20 seconds. Plastic Cure won't frost clear plastic and works on foam, Insta-Set Accelerator must be used when bonding two pieces of foam together. Full strength is reached in 3 hours. Excess cured adhesive can be removed by rubbing the area with a paper towel soaked in Un-Cure. Refrigerate to extend shelf life.
Warning: Eye and skin irritant. Bonds skin in seconds. Contains cyanoacrylate ester. If eye contact occurs, flush with water only and get medical attention. If skin bonding occurs, peal, don't pull: soak in Un-Cure or acetone if necessary. Use with adequate ventilation. Keep out of reach of children.
Made in the USA
