Wildman Rocketry Flying Model Rocket Kit 2.2" Mach 2(54mm) WIM 4045
This rocket wsd designed for use on a military project. They have successfully flown to speeds in excess of Mach 2 on single use L1000W motors.
The Mach 2 Rocket consists of
32.5" of thin wall 54mm fiberglass airframe
Aluminum-tipped filament wound nose cone with stainless steel eyebolt
Head end dual deployment with a fiberglass switch band
5" fiberglass coupler
Stepped avionics bay lids
CNC-cut and beveled 1/8" G10 fins
Also included
High temperature epoxy kit
Fin alignment guide
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
6 Pro - Professional Mid/High Power
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
