Quest Flying Model Rocket Starter Kit Quick Q QST 1409
The perfect way to get started in model rocketry!
The Quick-Q Flying Model Rocket Starter Set combines the rugged Quick-Q Quick-Kit, and a complete launch system. Everything you need for your first day of flying model rockets. Motors and Recovery Wadding Sold Separately. The launch equipment can be used to continue your adventure and fly the entire fleet of Quest model rockets.
The Quick-Q rocket does not require painting or finishing beyond the application of self-adhesive decals. It features colored body tubes, plastic nose cone and molded plastic fin-can assembly, plus Kevlar/elastic shock cord system, quick-release motor mount, self-adhesive decals and 14 inch recovery parachute.
The Lift-Off Launch Pad has tilt adjustment, rocket stand-off, 36-inch two-piece launch rod, and a metal blast deflector. The Q2 Launch Controller features blinking LED arming lamp, beeping “armed” alarm, and launch key with safety flag. One 9-volt snap-top battery is required for the launch controller operation - Not Included.
Skill Level 1 Beginner
Length: 19.5"(49.5cm)
Diameter: 1.181"(30mm) T30 Tube
Weight: 2.3oz(65.2g)
14" Parachute Recovery
Plastic Fin Can Assembly
Plastic Nose Cone
Kevlar and Elastic Shock Cord
1/8" Launch Lug Molded into the Fin Can
Self-Adhesive Decals
Uses Quest Q-Jet™ Black Max™: A3-4FJ, B4-4FJ, C12-6FJ, C12-8FJ, D16-6FJ, D16-8FJ
Uses Quest Q-Jet™ White Lightning™: B6-4W (1st flight) C18-6W, C18-8W, D20-6W, D20-8W
Estes A8-3, B6-4, C6-5
Flights up to 1,000'(305 m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
