Wildman Rocketry Flying Model Rocket Kit 2.2" Drago(29mm) Fiberglass WIM 1932
This mythical Dragon is one of the toughest mid-power vehicles you can find and will astonish you with its roaring fire breathing flights up to 2500 feet. Weighing in at only 1.65 lbs, it will fly on anything from E-I motors
Kit Features:
41 inches tall
Over 2 inches in diameter
29mm Motor Mount
Fiberglass nose cone
Fiberglass centering rings
Fiberglass fins
24" Parachute
5 yards of 1/2 inch flat Kevlar shock cord
Skill Level Pro
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
6 Pro - Professional Mid/High Power
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
