Estes Flying Model Rocket Kit Black Brant II 7243
The Black Brant series represents the most successful group of sounding rockets ever launched! This advanced 1:13 scale model rocket is a replica of the primary research vehicle produced by Canada Bristol Aerospace and is an excellent choice for your first scale project. Construction is fairly simple with the high quality parts we’ve included. Great performance and really impressive flights!
Guess who’s back! After 20 years in hiatus, the Black Brant II kit is rejoining the Estes line! The beloved Brant is sporting the same classic design from the 90s, however it’s now reproduced with laser cut wood fins and plastic toothpicks. Fun to build and exhilarating to fly, this rocket is one of the highest flying model rockets in the Estes scale collection.
The Black Brant family of sounding rockets was made in Canada in the late 50s. More than a half century later, highly reliable Black Brant rockets are still carrying scientific payloads to high altitude. Second in the series, the 28 foot long rocket first flew in 1960. It was eventually succeeded by the smaller but more powerful Black Brant III.
A stunning model, the Estes Black Brant II is a 1:13 scale replica of one of the earliest in the group. Standing nearly 25 inches tall, this impressive rocket is loaded with scale details. Finish your rocket with detailed waterslide decals and an 18 inch pre-assembled parachute for gentle recoveries. Use the recommended Estes D-12 engines (not included) to reach heights of 1300 feet. Build and fly your Black Brant II today!
Length 24.9 in.
Diameter 1.33 in.
Estimated Weight 3.0 oz
Estimated Assembly Time 4 Hours (painting and glue drying time not included)
Fin Materials Laser cut wood
Decal Type Waterslide
Recovery System 18 in. (45.7 cm) Parachute
Launch Rod Size 3/16" Maxi Rod (Sold Separately)
Estimated Assembly Time 4 Hours (painting and glue drying time not included) Download Instructions
Recommended Engines D12-5, D12-7
Projected Max Altitude 1300 ft.
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
