null
Estes Flying Model Rocket Kit Gryphon  EST 7280

Estes Flying Model Rocket Kit Gryphon EST 7280

(No reviews yet) Write a Review
$20.99
SKU:
EST 7280
UPC:
UPC047776072800
Availability:
Ships same or next day
Shipping:
Calculated at Checkout
Skill Level:
2 Intermediate
Motor Mount Size:
13mm

Estes Flying Model Rocket Kit Gryphon  EST 7280 Out Of Production

Built to protect, don’t underestimate the slim, yet stately design of the Gryphon. Standing 18 inches tall with a slender diameter measuring just over 0.5 inches, the sleek sports rocket is strong enough to support the six-inch wingspan of its stealthy cargo, a glider.

Meeting all expectations set by its legendary name, the Gryphon model glider kit will be the “King of the Air”. The Gryphon itself can soar to the height of 700 feet on an A10-3T engine. Upon reaching apogee, a colorful streamer acts as a tracking and recovery device to show where the rocket will land. During that time, the Gryphon’s stealthy glider moves magically across the sky to serve as a protector to everything below and will also gracefully return to earth to be readied for another flight.

Made from lightweight paper tubing and laser-cut balsa, the Gryphon is a great first step above a beginner rocket. In about two hours, plus painting time, rocketeers will build a rocket that will garner attention in both the air and when on display.

Skill Level 2 Intermediate

Length 18.0"

Diameter Rocket : 0.54"

Glider Wingspan : 6"

Estimated Weight 0.6oz

Estimated Assembly Time 2 Hours (painting and glue drying time not included)  Download Instructions

Fin Materials Laser Cut Wood

Decal Type Waterslide

Recovery System 12"(30.5cm) Streamer

Launch Rod Size 1/8"

Recommended Engines
A3-4T, 1/2 A3-2T, A10-3T

Projected Max Altitude 700'

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code

 

Full one year warranty through manufacturer