Estes Flying Model Rocket Kit Hi-Flier XL EST 3226
An upsized replica of the #1 selling Hi-Flier! Powered by Estes C11, D and E model rocket engines, amazing heights can be reached!
The name says it all! A sleek sport rocket standing over 30 inches tall, the Hi-Flier XL is an upsized replica of the #1 selling 2178 Hi-Flier. This rocket can heights over 1300 amazing feet.
The Hi-Flier XL flies on Estes C11, D and E model rocket engines and a bright 18 inch parachute brings it back to earth. Plan to fly this one again and again!
Skill Level 3 Advanced
Length: 31"(78.7cm)
Diameter: 1.64"(42mm)
Estimated Weight: 3.5oz(99.2g)
Laser cut Wood Fins
Water-slide Decals
18"(46cm) Parachute Recovery
3/16" Launch Lug
Estimated Assembly Time 2 Hours (painting and glue drying time not included) Download Instructions
Recommended Engines: C11-3 (First Flight), D12-5, D12-7, E12-6, E12-8, w/Engine Adapter (sold separately)- C6-3
Projected Max Altitude: 1325 ft. (404 m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
