Estes Flying Model Rocket Kit Mini Arcas EST 2441
Skill Level 3 - Advanced
Estes Mini Arcas! Designed for those seeking a challenge, the Mini Arcas boasts advanced skill level capabilities, designed to test your model rocketry knowledge!
Equipped with a Mylar Streamer recovery system, the Mini Arcas ensures a safe and reliable return after each launch. When using mini engines (13mm), the Mini Arcas can soar to an impressive altitude of 550 feet!
Inspired by the iconic Estes Arcas, this miniature marvel encapsulates the spirit of its predecessor in a miniature form. Its attention to detail and its flight capabilities make it a worthy addition to any rocket enthusiast's collection!
Get ready to experience the thrill of liftoff and launch into the skies with the Estes Mini Arcas!
Soaring Altitudes with Mini Engines
Using mini engines (13mm), the Mini Arcas can soar to an impressive altitude of 550 feet! Feel the rush as your rocket climbs higher and higher into the sky! The Mini Arcas delivers an adrenaline-pumping experience with each launch!
Inspired by Greatness
Inspired by the iconic Estes Arcas, this miniature version captures the spirit of its full-sized counterpart in a compact form. Its attention to detail and its flight capabilities make it a worthy addition to any rocket enthusiast's collection! Whether displayed on a shelf or soaring through the air, the Mini Arcas is sure to turn heads and spark conversation among fellow rocket enthusiasts.
Experience the Thrill
Get ready to experience the thrill of liftoff and launch into the skies with the Estes Mini Arcas! Whether you're competing in rocketry competitions or simply enjoying a day at the park, the Mini Arcas provides endless hours of excitement and adventure! Take your rocketry hobby to new heights with the Estes Mini Arcas!
Length - 14.52 in (36.85cm)
Diameter - .74 in (18.69mm)
Estimated Weight - Weight: .75oz (21.12g)
Projected Max Altitude - 550ft (168m)
Laser cut Wood Fins, Waterslide Decals, Streamer Recovery
Recommended Engines: A3-6T, A34T, 1/2A3-2T, A10-3T
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
