null
Estes Flying Model Rocket Kit SA-2061 Sasha  EST 7271

Estes Flying Model Rocket Kit SA-2061 Sasha EST 7271

(No reviews yet) Write a Review
Now: $19.79
Was: $32.99
SKU:
EST 7271
UPC:
UPC047776072718
Availability:
Ships same or next day
Shipping:
Calculated at Checkout
Skill Level:
4 Expert
Motor Mount Size:
24mm, 24mm

Estes Flying Model Rocket Kit SA-2061 Sasha  EST 7271

Inspired by Russian military design, this scale-like model rocket is sure to enthuse the most dedicated rocketeer. A masterful build, this high flying booster model rocket can reach heights of 2300 feet when powered by E model rocket engines in both stages.

A long-time hobbyist’s dream build, this high flying booster model rocket kit is what Estes model rocketry is all about. Based off of a Russian military spaceship, the Sasha is a scale-like model that would be a spectacular addition to any hobby rocket collection.

Durable and rugged this bad boy has two stages to lift the 6.1 ounce rocket into ‘outer space’. Powered by two D or E engines, the Sasha can soar to 2300 feet high. An 18 inch parachute will safely return the main rocket down to earth as the booster tumbles gently down to the ground. Once grounded, this 31-inch tall rocket will command respect when on display in any hobbyist’s collection.

Skill Level 4 Expert

Recovery System 18"(45.7cm) Parachute

Length 31.5"(80cm)

Diameter 1.64"(42mm)

Estimated Weight 6.1oz(172.9g)

Plastic Nose Cone

Laser Cut Wood Fins

Water Slide Decal

Multi Stage

3/16" Launch Lug 

Estimated Assembly Time 6 Hours (painting and glue drying time not included)

Recommended Engines
Rocket Only : C11-3, C11-5, D12-5, E12-6
Two Stages:
Rocket : D12-5, D12-7, E12-8
Booster : D12-0, E12-0

Projected Max Altitude 2300'(701m)

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code

 

Full one year warranty through manufacturer