Estes Flying Model Rocket Kit Show Stopper 2466 Out of Production
Chrome and more Chrome! Need we say more! Easy to assemble and no paint is necessary.
Chromed and almost ready for blast-off! The purple chromed nose cone and fins makes this rocket a real SHOW STOPPER! Blasting to almost 900 feet, the Show Stopper is powered by Estes C11 and D model rocket engines. And the chrome parts are EASY to see in the sky so you won’t lose this one!
Skill Level 1 Beginner
Length - 26.2"(66.5cm)
Diameter - 1.64"(42mm)
Estimated Weight 4oz(113.4g)
Plastic fins and Nose Cone
Self-Stick Decals
15"(38cm) Parachute Recovery
1/8" Launch Lug
Estimated Assembly Time 10 Minutes (painting and glue drying time not included) Download Instructions
Projected Max Altitude - 875'(267m)
Recommended Engines: C11-3 (First Flight), C11-5, D12-5, D12-7
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
