Estes Flying Model Rocket Kit Vapor EST 7294
The Vapor disappears into the sky on D and E engines, like a puff of smoke. It’s not for the faint of heart. This Estes rocket is for the advanced builders and adrenaline junkies. After carefully crafting this sleek model rocket, take the Vapor to the flying field to feel those massive motors rumble through your chest as it soars up to 900 ft.
Estimated Assembly Time: 2-3 hours
Length: 45.2″ (114.8cm)
Diameter: 1.64″ (4.16cm)
2 different looks - with different decals
Skill Level 3 Advanced
Recommended Engines D12-5, E12-6
Projected Max Altitude 900 ft. (274 m)
18"(45.7cm) Parachute Recovery
Length 45.2"(114.8cm)
Diameter 1.64"(42mm)
Estimated Weight 3.5oz(99.2g)
Estimated Assembly Time 2-3 Hours (painting and glue drying time not included)
Laser cut wood Fins
Waterslide Decals
3/16" Launch Lug
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
-
Perfect straight flights
I’ve always liked the taller rockets and this one fits that bill. Builds easily and looks great when finished. Perfect straight flights . I would buy this one again if lost or damaged
