LOC Precision Flying Model Rocket Kit 1.63" Sandhawk PFY-SHAWK
The IQSY Tomahawk is one of many Park Flyer kits. Designed to have the capability to be flown at ball diamond, large field, and anything in between. Includes a payload bay, 29mm motor mount and can be assembled in minutes!
All Park Flyer series kits include Laser cut fins and fin slots. Recovery systems have elastic cord, parachute and fire resistant blanket. Instructions included.
Skill Level: 3
Specifications:
Length: 36.5 in.
Diameter: 1.63 in.
Weight: 11 oz.
Recovery: 14" Parachute
Recommended Engines:
29mm
D,E,F,G
MMA-1 Motor Mount Adapter required to fly with 24mm motors
Maximum apogee 2000ft
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
