LOC Precision Flying Model Rocket Kit Starfighter LOC PK-07
The STAR FIGHTER 152 is a unique “Airplane” style rocket design that flies best on Aerotech F and G motors. Typical flight pattern is straight up with a half twist into the wind and glide to parachute deployment near apogee. New stabilizer construction is one piece with slide fit into a slot on the fin for easier alignment and gluing. The launch lug is covered by a shroud to complete the illusion of the intake duct. Parachute Recovery!
All LOC/PRECISION “PK-XX” kits include heavy duty airframe and motor mount tubes, high-grade precision-cut plywood fins, centering rings, rip-stop nylon parachute or streamer, nylon elastic shock cord and mount, launch lug, polypropylene nose cones and instructions.
Skill Level: 3
Specifications:
Length: 23.5 in.
Diameter: 1.63 in.
Weight: 12.5 oz.
Recovery: 14" parachute
Recommended Engines:
E30-4*, F23-4, G38-7
*24mm motors require motor mount adapter (sold separately)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
