LOC Precision Flying Model Rocket Kit 2.6" Hawk LOC TWT-HAWK
The 2.6" variation of the HAWK missile, sporting our Modular Motor Can for the widest variety of motor configurations. Stock with 29mm MMC it can easily be switched out for any of the available combinations. Using removable rivets you can switch out the configuration at any time! AND the cans are cross compatible with any other 2.6" MMC style kits! Multi-slotted airframe and fins for more surface area to secure the fins to the airframe!
Polyethylene Enhanced Nose Cone
2.6" Preslotted Heavy Duty Tube
Laser Cut Fins 1/8" Plywood
Nylon Ripstop Parachute 36"
29mm Motor Mount
Laser Cut Plywood Rings 1/8"
Tubular Nylon Shock Cord
Fire Protection Blanket
Recovery Swivel
Rail Guides
Vinyl Decal
Made in the USA
Skill Level: Pro
Diameter: 2.6″
Height: 34″
Weight: 1.45 lbs
Motors:
E30-5 450' (24mm configuration)
F67-5 850' (29mm configuration)
G78-7G 1200' (29mm Configuration)
4 x Estes C6-3 (4x18mm configuration)
3 x Estes D12-5 (3x24mm configuration)
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue), Epoxy
Sandpaper
Masking Tape
Finishing Supplies like:
Sanding Sealer
Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
