LOC Precision Flying Model Rocket Kit 4.0" Iris LOC YIRIS4
The 4" IRIS Kit is now including our LOC in ring/fin system, also a new 4:1 nose cone! One of the ADVANCED SERIES of kits, which include factory pre-slotted airframe and through-the-wall fin construction, Add an electronics bay for dual deployment flights. The IRIS sporting a 54mm motor mount will accept a number of different composite motors. Adapt down with reducers to fly 38mm or 29mm motors. This is certainly a versatile rocket! All hardware included for safe recovery, eye bolts, quick links and sewn ends on the tubular nylon. A perfect choice for level 1 or level 2 certifications.
Electronics Bay(excludes electronics)
Polyethylene Enhanced Nose Cone 4:1
Heavy Duty Tubes Lase Cut Through the Wall
Laser Cut Fins 1/4" Plywood
Nylon Ripstop Parachute 50"
54mm Motor Mount
Laser Cut Plywood Rings 1/4"
Nylon Shock Cord with sewn loops
Eye Bolt for Shock Cord Mount
Rail Buttons
Vinyl Decals
Made in the USA
Skill Level: Pro Intermediate-Advanced
Diameter: 4″
Height: 77"
Weight: 5.5lbs
Motors:
H100-6 950'
I-161-8 1650'
J-350-11 3400'
K-535-13 5500'
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue), Epoxy
Sandpaper
Masking Tape
Finishing Supplies like:
Sanding Sealer
Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
