LOC Precision Flying Model Rocket Kit 4.0" Patriot LOC YPAT438
Pre-slotted airframe and through-the-wall fins
high power motor capabilities. The Patriot is a fantastic jump into high power with your choice of airframe materials! Build it traditionally or assemble the fin can outside the airframe, knife the areas between the slots and slide it up--your choice!
Payload Section
1/8" Birch Plywood Fins
36" Rip Stop Nylon Parachute
Laser Cut Plywood Centering Rings
Rail Guides
Vinyl Decals
Scale Height of 53.5" Tall!
Nylon shock cord and mount
Polypropylene Nose Cone
38mm Motor Mount with Z-Clip Motor Retainer
Skill Level Pro
Motors:
F16-5 700'
H45-8 2750'
H100-9 2000'
I140-11 3100'
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro Mid and High Power
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
