Public Missiles PML Flying Model Rocket Kit 2.2" X-Calibur PML 21385 Special Order
Six fins, a large payload section, and PML`s standard G10 fins, Quantum Tube airframe, and great quality make this a bird you`re sure to enjoy.
Another of our kits that can fly on lower-power motors, the PML X-Calibur! Comes standard with a 38mm motor mount, but can easily fly with 29mm motors Fly it low and slow on a G motor, or put in an I and watch the X-Calibur "disappear"!
46" Length
32oz Weight
38mm Motor Mount
G10 Fin Thickness: 0.06"
Certification Level Class 1 & Level 1
Motors: G thru I Motor Recommendations
2.2" Pre-slotted Quantum Tube Airframe
12" Payload Section
Kevlar Tether(Replaces Old Style Baffle)
28" Nylon Parachute
Plastic Nose Cone
10/10 Rail Guides
Skill Level Pro
Quantum Airframes:
The Quantum Tube (QT), is made from a special blended polymer that is extremely durable and easy to use. You will find this new material easy to work with and very forgiving. Most hobby type epoxies and paints will readily adhere to this material as well. The Quantum Tube can be squeezed, dropped, or even thrown and will not suffer any damage as can sometimes occur to cardboard or phenolic tube. The Quantum Tubes are molded in medium gray and have a glass smooth finish. The Quantum Tube does have one thing missing, the spiral groove! You will appreciate the fact that you no longer have to fill and sand the airframes to achieve the perfect finish.
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro - High Power Rocket
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
