Public Missiles PML Flying Model Rocket Kit 2.6" SWR300 PML SWR300
Designed for an experiment, available for excitement! After a call from the scientists at Skinwalker Ranch for a specific design, we introduce the SWR-300. Commemorating the third season of the show on the History Channel. The 2.6" SWR-300 is a perfect kit for Level 1 with versatility to fly G through I motors. Now available for the hobby!
Diameter: 2.6"
Height: 48"
Motor Mount: 38mm
36" Parachute
13" Payload with Plywood Bulk Head and Eye Bolt with 2 Nuts and Washer
4 Laser Cut Birch Plywood Fins Thickness of 0.125"
Pre-Slotted Phenolic Airframe
Nylon Parachute
Quick Link for Parachute
Plastic Nose Cone
38mm Motor Mount
Piston Ejection System(Phenolic to Phenolic)
Kevlar and Nylon Strap Shock Cord
10/10 Rail Guides
Vinyl Decals
Motor Retention Upgrade Advised: Aero Pack RA38P
Recommended Reload Motors:
G16-6 1000'
G69-7 1400'
H123-10W 2110'
I140-12 4300'
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro - High Power Rockets
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at The NAR Website
