Public Missiles PML Flying Model Rocket Kit 3.1" Ariel PML 30542 Special Order Only
Ariel is a nice looking, easy to build kit with a 9" payload bay. Great for Level 1 and Level 2 flights! This sleek rocket stands 58" tall and weighs approximately 51 oz. Its stable design will allow you to lift a medium-sized payload to many thousands of feet using G through J motors.
3.1" Diameter Pre-slotted Quantum Tube Airframe
36" Nylon Parachute
Plastic Nose Cone
G-10 Fiberglass Fins 0.06" Thick
Kevlar Tether
10/10 Rail Guides
9" Payload Bay
54mm Motor Mount
Click here for the complete Data Sheet
Click here for the kit instructions
Quantum Airframes:
The Quantum Tube (QT), is made from a special blended polymer that is extremely durable and easy to use. You will find this new material easy to work with and very forgiving. Most hobby type epoxies and paints will readily adhere to this material as well. The Quantum Tube can be squeezed, dropped, or even thrown and will not suffer any damage as can sometimes occur to cardboard or phenolic tube. The Quantum Tubes are molded in medium gray and have a glass smooth finish. The Quantum Tube does have one thing missing, the spiral groove! You will appreciate the fact that you no longer have to fill and sand the airframes to achieve the perfect finish.
Height: 58"
Weight: 51oz
Recommended Motor Retainer Upgrade: RA38P
Certification Level: Level 1 and/or 2 Required to Fly
Motors: G thru J Motor Recommendations
Skill Level Pro
Motors:
Single Use(29mm): G80T, H55W, H70W With Optional Adapter: A2938
Re-loads(29mm): H97J, H128W, H180W, H220T, H238T, I200W With Optional Adapter: A2938
Re-loads(38mm): H73J, H112J, H123W, H148R, H242T, I154J, I161W, I195J, I211W, I435T
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro - High Power Professionals
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
