Public Missiles PML Flying Model Rocket Kit 4" Bumble Bee PML 39383 Special Order Only
Bumble Bee is short and sweet yet nice and stable. Not an inch of space is wasted inside of this rocket! Bumble Bee utilizes our new Stuffer Tube Recovery design. Much of the recovery system is inside of the nosecone! The shock cord is "built into" the nosecone and can never tear out. Bumble Bee comes with a 38mm motor mount standard. Can be flown on many H, I, and even some J motors!
Pre-slotted Quantum Tube Airframe
G-10 Fiberglass Fins 0.06" Thick
42" Rip Stop Nylon Parachute
Plastic Nosecone
Rail Guides for 10/10 Rail
Vinyl Decal Sheet
Made in the USA
Diameter: 3.9"
Height: 35.5"
Center of Pressure: 24.8"
Motor Mount: 38mm Phenolic Motor Mount
Aero Pack Motor Retention Upgrade Advised RA38P
Weight: 48oz
Certification Level: Level 1 Required to Fly
Motors: H and I
Motors:
Single Use(29mm): G80T-7(1200'), H55W-7(1550')
Re-loads(29mm): G75J-6(900'), H97J, H128W, H180W, H220T, H238T, I200W Adapter Required: A2938
Re-loads(38mm): H73J, H112J, H123W, H-135-9(2250') H148R, H242T, I140-10(3250), I154J, I161W, I195J, I211W
Skill Level Pro
Quantum Airframes:
The Quantum Tube (QT), is made from a special blended polymer that is extremely durable and easy to use. You will find this new material easy to work with and very forgiving. Most hobby type epoxies and paints will readily adhere to this material as well. The Quantum Tube can be squeezed, dropped, or even thrown and will not suffer any damage as can sometimes occur to cardboard or phenolic tube. The Quantum Tubes are molded in medium gray and have a glass smooth finish. The Quantum Tube does have one thing missing, the spiral groove! You will appreciate the fact that you no longer have to fill and sand the airframes to achieve the perfect finish. All PML rocket kits 2.1" dia. through 3.9" dia. come standard with Quantum Tube airframes.
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro Professional
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at The NAR Website
