Public Missiles PML Flying Model Rocket Kit 3.9" Striker PML 39382
Striker is similar in styling to some of the most advanced and devastating weapons on the modern battlefield. It'll sure to be a stunner at any launch!
Striker utilizes our new Stuffer Tube Recovery design. Striker comes with a 38mm motor mount and Linear Rail Lugs as standard equipment.
Striker Nose Cone Build Instructions
Pre-slotted phenolic airframe
Plastic nosecone
Kevlar tether with sewn loop
G-10 fins 0.063" thickness
Rail guides for 10/10 launch rails
Decal
Height: 36.5"
Weight: 52oz
38mm Motor Mount
36" Nylon Parachute
10/10 Rail Buttons
Certification Level: Level 1 and/or 2 Required to Fly
Motors: H thru J Motor Recommendations
Recommended Motors:
G80-7T 1150'
H182-10 2110'
H170-10 2850'
I-140-12 3050'
Skill Level Pro
Recommended Upgrade: Aero Pack Retainer RA38L
Optional Adapter from 38mm to 29mm Motors A2938
Quantum Airframes:
The Quantum Tube (QT), is made from a special blended polymer that is extremely durable and easy to use. You will find this new material easy to work with and very forgiving. Most hobby type epoxies and paints will readily adhere to this material as well. The Quantum Tube can be squeezed, dropped, or even thrown and will not suffer any damage as can sometimes occur to cardboard or phenolic tube. The Quantum Tubes are molded in medium gray and have a glass smooth finish. The Quantum Tube does have one thing missing, the spiral groove! You will appreciate the fact that you no longer have to fill and sand the airframes to achieve the perfect finish. All PML rocket kits 2.1" dia. through 3.9" dia. come standard with Quantum Tube airframes.
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro - High Power Kits
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at The NAR Website
