Quest Flying Model Rocket Kit Advanced Mean Green QST 5013
FAST and FURIOUS!
Mean Green is aerodynamic and sleek. 24 inches of pure fast rocket, the kit features blow-molded plastic nose cone, laser-cut balsa fins and a rugged 24mm diameter motor mount. Flights with a D12-5 will go to almost 1,200 feet. Then your Mean Green will recover gently on the big 16" fabric parachute. Includes big, easy-to-apply self adhesive decals.
Weight: 15.0oz
Skill Level 3 Advanced
16" Fabric Parachute Recovery
Laser Cut Balsa Fins
Length: 24.5"(62.2cm)
Diameter: 1.97"(5.0cm)
Recommended Motors:
Estes: D12-5, E12-6
Quest Q-Jet: D22-7W, E26-7W, E35-8W
Aerotech: E20-7W, E30-7T, F30-8FJ, F32-8T, F44-8W
Maximum Estimated Altitude 3000'(914m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
