Quest Flying Model Rocket Kit Advanced Quad Runner QST 5016
Big four 18mm rocket engine cluster, or optionally build it for a single 24mm motor. Experience the excitement of a 4 motor cluster launch or a big 24mm motor launch of this large 27 inch heavy walled rocket. There is nothing better than a 16" inch fabric parachute for recovery of this large advanced rocketry kit.
Weight: 4.7oz(132g)
Recovery: 16" Fabric Parachute
Laser Cut Balsa Fins
Length: 27.5'(69.9cm)
Diameter: 1.97"(5.0cm)
Skill Level 4 Expert
Recommended Motors:
Estes: B6-4(x4), C6-5(x4)
Quest Q-Jet: B4-4FJ(x4), C12-6FJ(x4), D16-6FJ(x4), D16-8FJ(x4)
Maximum Estimated Altitude 2400'(720m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
