Quest Flying Model Rocket Kit Totally Tubular Kit QST 1012
Unique design utilizes tube fin stabilization. Very easy to build and all the tubes are already colored and the decals are self-adhesive for easy application. Lots of fun to fly with streamer recovery.
Skill Level: 1 Beginner
24" Streamer Recovery
Tube Fins
Length: 15"(38.1cm)
Diameter: 0.787"(2cm)
The Quest Totally Tubular uses Q-Jet A3-4, B4-4, C12-6, D16-6, D16-8 model rocket motors. It can also be flown with Estes A8-3, B6-4 and C6-5 rocket motors
Maximum Estimated Altitude 1400'(427m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
