Quest Viper Single Bulk Pack Kit QST 1008
The Quest Viper model rocket matches the simplicity of a single piece fin unit with the added complexity of parachute recovery
The Viper model rocket provides the perfect combination of challenge and precision flight
One piece plastic fin unit simply slides into position on the body tube
Color coded parts make group building sessions much easier for an adult leader
Skill Level: 1 Beginner
14" Parachute Recovery
One Piece Plastic Fin Unit
Length: 17"(43cm)
Diameter: 0.984"(2.5cm)
Weight: 1.38oz(39g)
The Quest Viper uses Q-Jet A3-4, B4-4, C12-6, D16-6, D16-8 model rocket motors. It can also be flown with Estes A8-3, B6-4 and C6-5 rocket motors
Flies up to an Estimated Altitude of 1000'(304.8m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
