Rocketarium Flying Model Rocket Kit Black Brant IV Canadian Sounding Rocket 1/10 Scale ROC-RK-1013
-
22 Laser Cut Parts
-
Plastic nose cone and transition
-
Ejection Baffle (no wadding required)
-
18" Nylon Parachute
-
Over 43" Tall
-
Requires 3/16" Launch Rod
-
Intermediate Assembly Skills Required
Recommended Engines:D12-5, E12-6
E15-7, E20-7, E30-7, F44-8
E18-7, E28-7, F24-7
Specifications
-
Length: 43.9" (111 cm)
-
Diameter: 1.72" (43.7 mm)
-
Weight: 5.54 oz. (157 g)
-
Motor Mount: 24 mm.
-
Recovery System: 18" Nylon Parachute, Ejection Baffle
-
Projected Max Altitude: 1650 ft. (500 m)
Description
Original Black Brant IV was a two-stage rocket consisting of Black Brant V first stage with the Black Brant III second stage and was used by Canadian Space Agency and NASA. This kit is a single-stage model of Black Brant IV
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
