Rocketarium Sandia Sandhawk Scale Rocket Kit
The Sandia Corporation did research for the Atomic Energy Commission in the 1950's to develop nuclear weapons. The Sandhawk was one of the rockets used for this research. It was flown in single stage and two-stage configurations. This is the single stage version.
The Sandhawk model rocket stands a proud 37.3" tall. That's over 3 feet. A mid-power rocket for super-sized fun! The model includes details such as fin plates and plates between the fins. These are formed from templates and a body tube section. This is a Skill Level 3 kit.
Dimensions
Overall length : Over 3ft (37.3")
Diameter : 1.637" (BT60)
Fin Span : 6.67"
Weight : 3.9oz
Recommended Motors
Estes® D12-5
Single Use Aerotech® E20-7
Reloadable Aerotech® RMS E18-7, E28-7, F24-7
Challenges: The bolts found on the fin plates and plates between the fins are cut out of a single decal sheet. The fins are pre-cut. A body tube is cut into sections that fit between the fins. A template is provided for this. Cutting a body tube in this way can be a challenge. This is a Skill Level 3 kit. The plates are optional. They add to the visual appeal and make it easier to mask off those areas.
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code