Semroc Flying Model Rocket Kit Micro(MX) Hawk™ SEM-KMX-11
Skill Level: 2 Intermediate
Downscale of the Classic Hawk™
Precision Turned Balsa Nose Cone
Laser Cut Basswood Fins
Streamer Recovery
Body Diameter 0.281"
Length 6.9"(17.5cm)
Wing Span 5.06"(12.8cm)
Net Weight 0.07oz(2.0g)
Uses Micro Maxx Motor
Approx. Altitude 120'
Made in the USA
About the MX Hawk™
The MX Hawk is an offshoot of the Semroc Hawk Boost Glider. It is an approximate 50% Downscale, with some minor variations. The Nosecone shape has been changed because of the need for additional weight in the front of the glider. This kit utilizes the improved tab and slot assembly construction that was designed by Jay Berry. It has been implemented into the full scale Hawk Glider for easier construction, and better performance.
About Semroc
Semroc Astronautics Corporation was started by Carl McLawhorn in his college dorm at North Carolina State University in November, 1967. Convincing a small group of investors in his home town of Ayden, North Carolina to invest in a small corporation, the company was re-incorporated as Semroc Astronautics Corporation on December 31, 1969.
Semroc produced a full line of model rocket kits and motors. At its peak, Semroc had twenty-five full time employees working at two facilities. One was for research and development, printing, shipping, and administration. The other was outside of town and handled all production and model rocket motor
manufacturing. For several years, Semroc successfully sold model rocket kits, supplies, and motors by mail-order and in hobby shops. In early 1971, Semroc became insolvent and had to close its doors.
After 31 years of dreams and preparations, Semroc Astronautics Corporation was reincorporated on April 2, 2002 with a strong commitment to putting the fun back into model rocketry. Many years of excellent service to the rocketry community passed by until sadly, on August 11 2013, Carl passed away and left a great void in the hearts of many rocketeers. He is forever in our hearts and minds.
In February of 2015, Semroc was sold to eRockets and moved to Dayton, Ohio where it resides today. It is our goal to continue the level of service and dedication to the hobby Carl and his family were so well known for. We strive to serve you, our customers, to the best of our abilities as we carry the vision of Carl McLawhorn boldly into the future.
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
-
Nice kit
Grandsons love it. Me too
-
So Cool
I built this rocket in as evening. I did not paint it to keep its weight to a minimum. It flies great and just glides, and glides, and glides, and glides...
-
A Great Performer
As small and cute as this little boost glider is, it is a great performer. It glides forever.
