Semroc Flying Model Rocket Kit Pro QCC Explorer SEM-KP-99
A builders kit that contain instructions that include a logical order of assembly, High power rocket assembly techniques are required but not explained in the instructions. There will be a very limited run of this kit.
4 Realistic Nacelles
Payload Bay
Plastic Nose Cone and Shear Pins
Rail Buttons for 10/10 Rail
1/4" Laser-Cut Plywood Fins Fins and Centering Rings
45" Rip Stop Nylon Parachute - Red
1500 Pound Kevlar Shock Cord
Shock Cord Zipper Protector
Skill Level 5 Master Pro
Sticker Shock Vinyl Decals in Blue
Body Diameter 4.0"
Length is over 7' tall
Net Weight 5.2 Pounds
3D Printed Tail Cone
Aero Pack Aluminum Motor Retainer
Made in the USA
38mm Motors:
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro Professional Mid and High Power
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
